Standards Adopted

• SKNNS 001 – (CRS 1) Specification for Packaged Water
• SKNNS 002 – (CRS 5) Labelling of Pre-Packaged Food
• SKNNS 003 – (CRS 55 – 1) Labelling of goods — Part 1: General requirements
• SKNNS 004 – (CRS 55 – 2) Labelling of goods — Part 2: Specific Requirements for Prepackaged Goods
• SKNNS 005 – CARICOM Regional Energy Efficiency Building Code (CREEBC)
• SKNNS 006 – (ISO 13009) Tourism and Related Services — Requirements and Recommendations for Beach Operations
• SKNNS 007 – (ISO 14001) Environmental Management System

• SKNNS 008- (ISO 14785) Tourist information and reception services — Requirements

• SKNNS 009- (ISO 21401) Tourism and Related Services –Sustainability management system for accommodation establishments — Requirements

• SKNNS 010- (ISO 18513) Tourism Services – Hotels and other types of tourism accommodation — Vocabulary

• SKNNS 011- (ISO/PAS 5643) Tourism and Related Services –Requirements and guidelines to reduce the spread of Covid-19 in the tourism industry

• SKNNS 012- (ISO 13009) Tourism and Related Services – Requirements and recommendations for beach operation

• SKNNS 013- (ISO 13970) Recreational diving services — Requirements for the training of recreational snorkelling guides

• SKNNS 014- (ISO 13687-1) Tourism and related services — Yacht harbours — Part 1: Minimum requirements for basic service level harbours

• SKNNS 015- (ISO 13687-2) Tourism and related services — Yacht harbours — Part 2: Minimum requirements for intermediate service level harbours

• SKNNS 016- (ISO 13687-3) Tourism and related services — Yacht harbours — Part 3: Minimum requirements for high service level harbours

• SKNNS 017- (ISO 21406) Tourism and related services — Yacht harbours — Essential requirements for luxury harbours

• SKNNS 018-(ISO/TS 13811) Tourism and related services — Guidelines on developing environmental specifications for accommodation establishments

• SKNNS 019- (ISO 17679) Tourism and Related Service Wellness spa — Service requirements

• SKNNS 020- (ISO 21417) Recreational diving services — Requirements for training on environmental awareness for recreational divers

• SKNNS 021- (ISO 11121) Recreational diving services — Requirements for introductory programmes to scuba diving

• SKNNS 022- (ISO 21101) Adventure tourism — Safety management systems — Requirement

• SKNNS 023- (ISO 20611) Adventure tourism — Good practices for sustainability — Requirements and recommendations

• SKNNS 024-(ISO/DIS 3021)Adventure tourism — Hiking and trekking activities — Requirements and recommendations

• SKNNS 025- (ISO 21902) Tourism and related services — Accessible tourism for all — Requirements and recommendations

• SKNNS 026- (ISO/DIS 23405) Tourism and related services — Sustainable tourism — Principles, terminology and Model

• SKNNS 027- (ISO 24801-1) Recreational diving services — Requirements for the training of recreational scuba divers — Part 1: Level 1 — Supervised diver

• SKNNS 028- (ISO 24801-2) Recreational diving services — Requirements for the training of recreational scuba divers — Part 2: Level 2 — Autonomous diver

• SKNNS 029- (ISO 24801-3) Recreational diving services — Requirements for the training of recreational scuba divers — Part 3: Level 3 — Dive leader

• SKNNS 030- (ISO 24802-1) Recreational diving services — Requirements for the training of scuba instructors — Part 1: Level 1

• SKNNS 031- (ISO 24802-2) Recreational diving services — Requirements for the training of scuba instructors — Part 2: Level 2

• SKNNS 032- (ISO 24803)  Recreational diving services — Requirements for recreational diving providers

• SKNNS 033- (ISO 18400) Soil quality — Sampling — Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites

• SKNNS 034- (IWA 20)      Understanding and applying drip irrigation for sustainable agriculture

• SKNNS 035- (ISO 8026)   Agricultural irrigation equipment — Sprayers — General requirements and test methods

• SKNNS 036- (ISO 22000) Food safety management systems — Requirements for any organization in the food chain

• SKNNS 037-(ISO/TS 22002-1)       Prerequisite programmes on food safety — Part 1: Food manufacturing

• SKNNS 038- (ISO/TS 22002-2)      Prerequisite programmes on food safety — Part 2: Catering

• SKNNS 039-(ISO/TS 22002-3)       Prerequisite programmes on food safety — Part 3: Farming

• SKNNS 040-(ISO/TS 22002-5)       Prerequisite programmes on food safety — Part 5: Transport and storage

• SKNNS 041-(ISO/TS 19657)           Definitions and technical criteria for food ingredients to be considered as natural

• SKNNS 042- (ISO 50001) Energy management systems — Requirements with guidance for use

• SKNNS 043- (ISO 50007) Energy services — Guidelines for the assessment and improvement of the energy service to users

• SKNNS 044- (ISO 14004) Environmental management systems — General guidelines on implementation

• SKNNS 045- (ISO 14055 – 1)Environmental management — Guidelines for establishing good practices for combatting land degradation and desertification — Part 1: Good practices framework

• SKNNS 046- (ISO 15270) Plastics — Guidelines for the recovery and recycling of plastics waste

• SKNNS 047- (ISO 146 suite)

• SKNNS 048- (ISO 24512) Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services

• SKNNS 049-(ISO/TS 24541) Service activities relating to drinking water supply, wastewater and stormwater systems — Guidelines for the implementation of continuous monitoring systems for drinking water quality and operational parameters in drinking water distribution networks

• SKNNS 050- (ISO 45001) Occupational health and safety management systems — Requirements with guidance for use

• SKNNS 051-(ISO/PAS 45005) Occupational health and safety management — General guidelines for safe working during the COVID-19 pandemic

• SKNNS 052- (ISO 45003) Occupational health and safety management — Psychological health and safety at work — Guidelines for managing psychosocial risks

• SKNNS 053- (C31/C31M-19a)       Standard Practice for Making and Curing Concrete Test Specimens in the Field

• SKNNS 054- (C29/C29M-17a)       Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

• SKNNS 055-(C33/C33M-18)          Standard Specification for Concrete Aggregates

• SKNNS 056-(C39/C39M-20)          Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

• SKNNS 057-(C42/C42M-20)          Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

• SKNNS 058-(C94/C94M-20)          Standard Specification for Ready-Mixed Concrete

• SKNNS 059- (C125-20)    Standard Terminology Relating to Concrete and Concrete Aggregates

• SKNNS 060- (C127-15)    Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

• SKNNS 061- (C128-15)    Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

• SKNNS 062-(C136/C136M-19)      Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

• SKNNS 063-(C140/C140M-20a)    Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

• SKNNS 064- (C150/C150M-20)     Standard Specification for Portland Cement

• SKNNS 065-(C172/C172M-17)      Standard Practice for Sampling Freshly Mixed Concrete

• SKNNS 066-(C192/C192M-19)      Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

• SKNNS 067-(C232/C232M-20)      Standard Test Method for Bleeding of Concrete

• SKNNS 068- (C294-19)    Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

• SKNNS 069-(C470/C470M-15)      Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

• SKNNS 070- (C482-20)    Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

• SKNNS 071-(C494/C494M-19)      Standard Specification for Chemical Admixtures for Concrete

• SKNNS 072-(C873/C873M-15)      Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

• SKNNS 073-(C823/C823M-12(2017))         Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

• SKNNS 074- (C900-19)    Standard Test Method for Pullout Strength of Hardened Concrete

• SKNNS 075- (C926-20b)  Standard Specification for Application of Portland Cement-Based Plaster

• SKNNS 076- (C932-06)    Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

• SKNNS 077-(C1017/C1017M-13e1) Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

• SKNNS 078-(C1040/C1040M-16a) Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

• SKNNS 079-(C1059/C1059M-13)                Standard Specification for Latex Agents for Bonding Fresh to Hardened Concrete

• SKNNS 080-(C1064/C1064M-17)                Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

• SKNNS 081-(C1157/C1157M-20)                Standard Performance Specification for Hydraulic Cement

• SKNNS 082- (A184 / A184M – 19) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

• SKNNS 083- (A416 / A416M – 18) Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

• SKNNS 084- (A421 / A421M – 21) Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

• SKNNS 085- (A615 / A615M – 20) Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

• SKNNS 086- (A648 – 18) Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

• SKNNS 087- (A704 / A704M – 19e1) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

• SKNNS 088- (A706 / A706M – 16) Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

• SKNNS 089- (A722 / A722M – 18) Standard Specification for High-Strength Steel Bars for Prestressed Concrete

• SKNNS 090- (A767 / A767M – 19) Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

• SKNNS 091- (A775 / A775M – 19) Standard Specification for Epoxy-Coated Steel Reinforcing Bars

• SKNNS 092- (A779 / A779M – 16) Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

• SKNNS 093- (A820 / A820M – 16) Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

• SKNNS 094- (A821 / A821M – 21) Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

• SKNNS 095- (A881 / A881M – 16a) Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

• SKNNS 096- (A882 / A882M – 20) Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand

• SKNNS 097- (A884 / A884M – 19e1) Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

• SKNNS 098- (A910 / A910M – 18) Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

• SKNNS 099- (A911 / A911M – 21) Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties

• SKNNS 100- (A934 / A934M – 19) Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

• SKNNS 101- (A944 – 10) Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

• SKNNS 102- (A951 / A951M – 16e1) Standard Specification for Steel Wire for Masonry Joint Reinforcement

• SKNNS 103- (A955 / A955M – 20c) Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

• SKNNS 104- (A970 / A970M – 18) Standard Specification for Headed Steel Bars for Concrete Reinforcement

• SKNNS 105- (A981 / A981M – 11) Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

• SKNNS 106- (A996 / A996M – 16) Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

• SKNNS 107- (A1022 / A1022M – 16b) Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

• SKNNS 108- (A1032 – 15) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe

• SKNNS 109- (A1034 / A1034M – 10a) Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

• SKNNS 110- (A1035 / A1035M – 20) Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

• SKNNS 111- (A1044 / A1044M – 16ae1) Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

• SKNNS 112- (A1055 / A1055M – 16) Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

• SKNNS 113- (A1060 / A1060M – 16b) Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

• SKNNS 114- (A1061 / A1061M – 20ae1) Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand

• SKNNS 115- (A1064 / A1064M – 18a) Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

• SKNNS 116- (A1078 / A1078M – 19) Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

• SKNNS 117- (A1081 / A1081M – 21) Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

• SKNNS 118- (A1094 / A1094M – 20) Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

• SKNNS 119- (A1096 / A1096M – 15) Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement

• SKNNS 120- (A1114 / A1114M – 20) Standard Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete

• SKNNS 121- (D3963 / D3963M – 21) Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

• SKNNS 122- (D2898 – 10) Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing

• SKNNS 123- (D3201 / D3201M – 20) Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products

• SKNNS 124- (D5516 – 18) Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures

• SKNNS 125- (D5664 – 17) Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber

• SKNNS 126- (D6305 – 08 e1) Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing

• SKNNS 127- (D6841 – 21) Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber

• SKNNS 128- (D7857 – 16) Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures

• SKNNS 129- (D8223 – 19) Standard Practice for Evaluation of Fire-Retardant Treated Laminated Veneer Lumber

• SKNNS 130- (E69 – 15) Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus

• SKNNS 131- (D5536 – 17) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties

• SKNNS 132- (D7480 – 08) Standard Guide for Evaluating the Attributes of a Forest Management Plan

• SKNNS 133- (D7612 – 21) Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources

• SKNNS 134- (D143 – 21) Standard Test Methods for Small Clear Specimens of Timber

• SKNNS 135- (D1102 – 84) Standard Test Method for Ash in Wood

• SKNNS 136- (D1105 – 21) Standard Test Method for Preparation of Extractive-Free Wood

• SKNNS 137- (D1106 – 21) Standard Test Method for Acid-Insoluble Lignin in Wood

• SKNNS 138- (D1107 – 21) Standard Test Method for Ethanol-Toluene Solubility of Wood

• SKNNS 139- (D1108 – 21) Standard Test Method for Dichloromethane Solubles in Wood

• SKNNS 140- (D1109 – 21) Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood

• SKNNS 141- (D1110 – 21) Standard Test Methods for Water Solubility of Wood

• SKNNS 142- (D1166 – 21) Standard Test Method for Methoxyl Groups in Wood and Related Materials

• SKNNS 143- (D1666 – 17) Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Panel Materials

• SKNNS 144- (D2394 – 17) Standard Test Methods for Simulated Service Testing of Wood and Wood-Based Finish Flooring

• SKNNS 145- (D2395 – 17) Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

• SKNNS 146- (D4442 – 20) Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials

• SKNNS 147- (D4444 – 13(2018)) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

• SKNNS 148- (D4761 – 19) Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials

• SKNNS 149- (D4933 – 16) Standard Guide for Moisture Conditioning of Wood and Wood-Based Materials

• SKNNS 150- (D6782 – 19) Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

• SKNNS 151- (D6815 – 09) Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

• SKNNS 152- (D6874 – 21) Standard Test Methods for Nondestructive Evaluation of the Stiffness of Wood and Wood-Based Materials Using Transverse Vibration or Stress Wave Propagation

• SKNNS 153- (D6958 – 20) Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

• SKNNS 154- (D7438 – 20) Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

• SKNNS 155- (D7469 – 16) Standard Test Methods for End-Joints in Structural Wood Products

• SKNNS 156- (D245 – 06(2019)) Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

• SKNNS 157- (D1990 – 19) Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

• SKNNS 158- (D2555 – 17a) Standard Practice for Establishing Clear Wood Strength Values

• SKNNS 159- (D2915 – 17) Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

• SKNNS 160- (D3737 – 18e1) Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

• SKNNS 161- (D5055 – 19e1) Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

• SKNNS 162- (D5456 – 21e1) Standard Specification for Evaluation of Structural Composite Lumber Products

• SKNNS 163- (D5457 – 21a) Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

• SKNNS 164- (D6570 – 18a) Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

• SKNNS 165- (D7031 – 11) Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

• SKNNS 166- (D7032 – 17) Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails

• SKNNS 167- (D7199 – 20) Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

• SKNNS 168- (D7341 – 21) Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

• SKNNS 169- (D7374 – 08) Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

• SKNNS 170- (D7470 – 08) Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs

• SKNNS 171- (CXS 247)     General Standard for Fruit Juices and Nectars

• SKNNS 172- (CXS 296)     Standard for Jams, Jellies and Marmalades

• SKNNS 173- (CXS 12)       Standard for Honey

• SKNNS 174- (CXS 176)     Standard for Edible Cassava Flour

• SKNNS 175- (CXS 152)     Standard for Wheat Flour

• SKNNS 176- (CXS 154)     Standard for Whole Maize (Corn) Meal

• SKNNS 177- (CXS 153)     Standard for Maize (Corn)

• SKNNS 178- (CXS 3)         Standard for Canned Salmon

• SKNNS 179- (CXS 94)       Standard for Canned Sardines and Sardine-Type Products

• SKNNS 180- (CXS 236)     Standard for Boiled Dried Salted Anchovies

• SKNNS 181- (CXS 167)     Standard for Salted Fish and Dried Salted Fish of the Gadidae Family of Fishes

• SKNNS 182- (CXS 165)     Standard for Quick Frozen Blocks of Fish Fillets, Minced Fish Flesh and Mixtures of Fillets and Minced Fish Flesh

• SKNNS 183- (CXS 166)     Standard for Quick Frozen Fish Sticks (Fish Fingers), Fish Portions and Fish Fillets – Breaded or in Batter

• SKNNS 184- (CXS 190)     Standard for Quick Frozen Fish Fillets

• SKNNS 185- (CXS 281)     Standard for Evaporated Milks

• SKNNS 186- (CXS 282)     Standard for Sweetened Condensed Milks

• SKNNS 187-(CXS 273)      Standard for Cottage Cheese

• SKNNS 188- (CXS 283)     General Standard for Cheese

• SKNNS 189- (CXS 279)     Standard for Butter

• SKNNS 190- (CXS 289)     Standard for Whey Powders

• SKNNS 191- (CXS 306R)   Regional Standard for Chilli Sauce

• SKNNS 192- (CXS 330)     Standard for Aubergines

• SKNNS 193- (CXS 225)     Standard for Asparagus

• SKNNS 194- (CXS 318)     Standard for Okra

• SKNNS 195- (CXS 224)     Standard for Tannia

• SKNNS 196- (CXS 293)     Standard for Tomatoes

• SKNNS 197- (CXS 13)       Standard for Preserved Tomatoes

• SKNNS 198- (CXS 216)     Standard for Chayotes

• SKNNS 199- (CXS 197)     Standard for Avocado

• SKNNS 200- (CXS 316)     Standard for Passion Fruit

• SKNNS 201- (CXS 182)     Standard for Pineapples

• SKNNS 202- (CXS 184)     Standard for Mangoes

• SKNNS 203- (CXS 205)     Standard for Bananas

• SKNNS 204- (CXS 255)     Standard for Table Grapes

• SKNNS 205- (CXS 219)     Standard for Grapefruits

• SKNNS 206- (CXS 299)     Standard for Apples

• SKNNS 207- (CXS 67)       Standard for Raisins

• SKNNS 208- (CXS 75)       Standard for Quick Frozen Peaches

• SKNNS 209- (CXS 78)       Standard for Canned Fruit Cocktail
• SKNNS 210- (CXS 297)     Standard for Certain Canned Vegetables
• SKNNS 211- (CXS 77)       Standard for Quick Frozen Spinach
• SKNNS 212- (CXS 110)     Standard for Quick Frozen Broccoli
• SKNNS 213- (CXS 111)     Standard for Quick Frozen Cauliflower
• SKNNS 214- (CXS 112)     Standard for Quick Frozen Brussels Sprouts
• SKNNS 215- (CXS 114)     Standard for Quick Frozen French Fried Potatoes
• SKNNS 216- (CXS 88)       Standard for Corned Beef
• SKNNS 217- (CXS 218)     Standard for Ginger
• SKNNS 218- (CXS 328)     Standard for Dried Thyme

If you wish to purchase any of these standards, please contact us at 869-467-1498 or email us at sknbs@gov.kn.